AF-S NIKKOR 300mm f/2.8G ED VR II and AF-S Teleconverter TC-20E III

December 10, 2009

A fast telephoto lens offering built-in Vibration Reduction (VR II), and the world's first telephoto converter to utilize an aspherical lens element, extending focal length by 2x, both compatible with the FX format

TOKYO — Nikon Corporation is pleased to announce the release of two new lens products, compatible with the FX format. The fast telephoto AF-S NIKKOR 300mm f/2.8G ED VR II lens is equipped with vibration reduction (VR II) that reduces the effects of camera shake equivalent to a shutter speed increase of approximately four stops. The AF-S Teleconverter TC-20E III, is the world's first teleconverter^* to utilize an aspherical lens element.

Nikon's development of the FX-format D3-series and D700 digital-SLR cameras has received tremendous support from professional and advanced amateur photographers. Nikon is expanding NIKKOR lens and accessory lineups by releasing new, high-performance products compatible with the FX format, allowing us to cater to the more advanced demands of users.

*As of December 10, 2009 (according to research conducted by Nikon Corporation).

AF-S NIKKOR 300mm f/2.8G ED VR II primary features

Built-in vibration reduction (VR II) offering camera shake compensation equivalent to a shutter speed increase of approximately 4 stops
The addition of A/M (autofocus with manual override; AF priority) focus mode prevents accidental switching from autofocus to manual focus. Along with M/A (autofocus with manual override; manual priority) mode, which enables manual focusing by rotating the focus ring while autofocus is operating and M (manual) mode, this makes for a total of three focus modes.
The lens optics and Nano Crystal Coat so well received with previous lenses have been adopted without modification

AF-S NIKKOR 300mm f/2.8G ED VR II primary specifications

Swipe horizontally to view full table.

Focal length	300mm
Maximum aperture	f/2.8
Minimum aperture	f/22
Lens construction	11 elements in 8 groups (3 ED glass elements, Nano Crystal Coat) 1 protective glass element
Angle of view	8°10’ (5°20’ with Nikon DX format)
Closest focusing distance	Autofocus: 2.3 m Manual focus: 2.2 m
No. of diaphragm blades	9 (rounded)
Focusing	Autofocus utilizing an internal Silent Wave Motor Manual focus possible
Filter/attachment size	52 mm
Diameter x length (extension from lens mount)	Approximately 124 (dia.) x 267.5 mm (extension from the camera's lens-mount flange)
Weight	Approximately 2,900 g
Supplied accessories	Slip-on front lens cap, Rear Lens Cap LF-1, Lens Hood HK-30, Semi-soft Case CL-L1, Dedicated filter holder, 52mm Screw-on NC Filter, Strap LN-1

AF-S Teleconverter TC-20E III primary features

An FX-format compatible teleconverter that extends the focal length of the primary lens by 2X^*
The world's first teleconverter to utilize an aspherical lens element
A new optical design that offers superior contrast and resolution
Utilization of an aspherical lens element enabled a more compact and lightweight teleconverter

*Using this teleconverter with a lens decreases the effective aperture by two stops.

AF-S Teleconverter TC-20E III primary specifications

Swipe horizontally to view full table.

Reproduction ratio	2X that of the primary lens
Lens construction	7 elements in 5 groups (1 aspherical lens element)
Dimensions	Approximately 66 (dia.) X 48 mm (extension from the camera's lens-mount flange)
Weight	Approximately 330 g
Supplied accessories	Teleconverter Cap BF-3A, Rear Lens Cap LF-1, Flexible Lens Pouch CL-0715

Specifications and equipment are subject to change without any notice or obligation on the part of the manufacturer.